techno18

Best Automated Forex Robot

Introduction
—————
Forex Robots are automated systems that trade the forex market for you. They are also known as expert advisors (ea’s) and can be referred to as automated trading software.

Advantages
———-
They are useful if you dont have time to trade the currency market on a daily basis. This is referred to as day trading and in some cases scalping. The automated software will can trade for you and make you profit provided you choose a good forex robot. There are reviews all over the net on the different robots available. Forex forums are a good place to look for information. The also reduce the stress day trading can cause and help aspiring traders who have discipline and emotion problems. These can both have a negative affect on trading. Fear and greed are eliminated when automated software trades on your behalf.

Disadvantages
———-
Some people claim that forex robots do not work. Of course not all work but there are a few that can produce profit provided they are used correctly. Factors that have to be considered are: Does the forex robot use a stop loss? You should never use a martingale system as this can blow your account in a single trade. It is also important to choose a broker who has a competitive spread on the pair that the forex robot trades on. Many systems look good in back testing due to slippage, spread and execution delays not being taking into consideration. It is a good idea to forward test the expert advisor before using it on your live account.

What to look for in a forex robot
———–
Make sure that it uses a stop loss. It would be an advantage if it runs on currency pairs with low spreads. Also check the time that the ea is active. Scalping ea’s that run during the quieter times are amongst the most profitbale and have little risk. Even scalping robots can bring big profits with small drawdowns.

Summary
——–
Forex robots do work, it is just a matter of back testing and forward testing untill the system is optimized to bring the highest amount of profit with the smallest amount of risk and drawdown. I use an ea on my live account that I have setup on a virtual private server and it brigns me great results everyday without me having to go through the stress that manual traders do.

Good Luck with your trading!

techno18

Yellow Mouse Robots Spray Repel Search Engine Robots From Indexing Your Pages

Don’t you hate it if your download page or thank you page can be found in Google, Yahoo or MSN? What about your eBook, is it listed in Google, too?

Your result of your hard work can be accessed by everyone because your page is simply indexed by search engines such as Google. You invested your money, time and energy to create your best product but your product can be found by everyone easily without even paying you. You could loose thousands of dollars. You don’t want this happen to you, do you?

So here comes the yellow mouse robots spray. Repel search engine robots from indexing your pages!

Robots.txt

Robots.txt is a simple text file that tells the search engine robots not to crawl certain directories and pages of your site.

When a robot crawls your site it looks for the robots.txt file. If it doesn’t find one it assumes automatically that it may crawl and index the entire site. Not having a robots.txt file can also create unnecessary 404 errors (page not found error) in your server logs, making it more difficult to track the real 404 errors.

Creating robots.txt file is easy.

1. Open your notepad or other text editor (not HTML editor).

2. Type this following to prevent all robots to crawl or index your certain directory:

User-agent:*

Disallow:/directory/

where directory is the directory that you don’t want to be crawled or indexed by search engine robots.

3. Save the file as robots.txt.

4. Upload it to your domain root directory so that it looks like this:

5. Confirm if everything is correct using robots.txt validator. (You can easily find robots.txt validator using Google Search).

For more information on robots.txt, you can visit .

Are these two tricks enough to protect your product download page, thank you page and private page? Perhaps, because nothing is perfect in this world.

So I’ll give you another trick to double protect your precious page.

Meta tags

Another trick, which may be more convenient for page usage, adds a META tag to an HTML page to tell search engine robots not to index the page.

To prevent all robots from indexing a page on your site, place this following META tag into the HEAD section of your page:

META NAME=”ROBOTS” CONTENT=”NOINDEX, NOFOLLOW”

(Add “” after the code).

That should helps protect your precious pages.

One more trick, exclusive to blog only!

Disallow Pings

All of those tricks above are useless if you still allow pings for your blog page or blog post.

Disallow pings for your precious page.

If you use WordPress:

1. Expand your discussion tab.

2. Uncheck “Allow Pings”.

These tricks should help you protect your product download page, thank you page and private page. However, these tricks don’t protect your precious page if your buyer adds it to his Internet Explorer’s Favorite, Firefox’s Bookmarks or social bookmarks and share the link with his friends.

techno11

Ideas For Quick Science Fair Projects

Quick Science Fair Projects

Students in high school participate in science fairs in order to demonstrate their advanced understanding of a biological or physical sciences concept. These students are required to present a project that indicates higher order thinking and analysis. The standards for evaluating projects for these grade levels can be quite high and the competition can be fierce. The events for young students are based on different principles. Often younger students in the earlier grades participate in quick science fair projects. These quick science fair projects are not based on the level of knowledge or application principles of the high school students projects. The quick science fair projects in the earlier grades are based more on demonstrating an understanding of the facts related to a particular topic of science.

Quick science fair projects for the younger students are often completed in a matter of days, where the high school age students can spend weeks or even months on their projects. The quick science fair projects designed for younger students are tailored for the learning styles and abilities of this age of student. Thinking abstractly is not skills that younger students have developed so quick science fair projects are perfectly suited for their abilities. The characteristics of quick science fair projects include the use of every day items that can be found easily in the home or classroom. The teacher will often provide the necessary materials so that these younger students can experience the successful completion of their quick science fair projects.

While there are processes and the need to record data while completing quick science fair projects, the steps involved will be clearly explained to the students. For the earlier grades it is more important to carefully instruct them throughout the process of completing their projects. Older students can generate some of their own questions and testable theories, but younger students fare better with a set list of materials and how to use those materials to achieve the results. When deciding which quick science fair projects to use in the classroom it is important for these reasons to choose projects that are age appropriate. This way you ensure that the experience of bringing science to life is rewarding and enjoyable for your students.

techno14

Cooling a Server Room the Cost-Efficient Way

As the servers are used constantly, they generate tremendous heat. When this heat increases beyond control, it may lead to damage of the devices and equipment. Being machines, the computers are delicate under the hood and are prone to damage due to carelessness. System crashes, reboots, hang-ups, untimely failures; poor performance and other problems can be created due to abnormal temperatures. Now, one way to keep these issues under control is to maintain the server room’s temperature. Sufficient ventilation, cooling and maintained temperature are the efficient ways to protect computers and servers.

Maintaining the temperature

The computers used at homes and for small offices come with internal cooling devices, which usually keep the desktops and laptops cool. Nevertheless, the server rooms that manage a number of systems do not have sufficient internal cooling systems. They have to be kept cool using an external cooling source, such as portable air-conditioner. Secondly, increased humidity inside the enclosed area can cause corrosion or rust. The maximum humidity level of a server room should not exceed 40 to 50 percent.

Are portable air conditioners good solutions for cooling?

The temperature of the server room should be steadily cool around-the-clock. If the room or storage area is connected to the central cooling systems, they may be shut down during the weekends or sometime late at night, depending upon the company’s working hours. If the cooling systems fail, the computer systems are prone to face the brunt.

Portable air-conditioners keep the server rooms cool, as the temperature can be controlled individually depending upon the outside temperature. There are few air-conditioners that adjust the temperature according to the outside temperature on certain modes. They are self-contained units which do not require permanent installation. Business owners can move these units anywhere as required.

A portable AC used in such places must have condensation tank to manage the humidity level, automatic restart function and proper ventilation to replace the hot air inside the room. These features not only keep the servers cool but also regulate fresh air and keep the machines working continuously. The automatic function keeps the air conditioners working continuously even when there is a power cut or failure.

When it comes to the size of the air conditioners it is never an issue. The server closet of size 9000 to 12000BTU will be sufficient for the unit to fit in. While a 12K BTU unit requires 9 to 12 amps a huge unit of 14000BTU requires 20 amps. The air-conditioner should be thoroughly checked for the necessary requirements before installation.

techno2

Leather Hardware Products Add Glamour To Your Accessories

Leather goods never go out of fashion. Which is also why, the leather hardware industry has seen a steady growth. Hardware used on leather products usually comprises parts such as buckles, zippers, locks and badges. If you want to project your brand as a classy product, it is imperative to make use of quality hardware products. These hardware parts for leather products are usually available in brass and zinc. However there are several high-end luxury brands that make use of various alloys.

Such handbag supplies can either be bought as standard products or they can be custom-ordered. No matter what you are ordering, it is important to purchase these components from a reputed manufacturer who will understand what will suit your products. Following are some easy tips to help you choose a good leather hardware manufacturer:

1. The manufacturer should have enough experience so that you get the finest consulting, designs and products.

2. It is advisable to check the current and past clients of the manufacturer. If their clientele consists of reputed names, it is a positive sign.

3. There are several manufacturers who accept designs from you and manufacture products in keeping with your specifications. In such cases however, it is important to check the kind of software and raw materials being used. These factors have a direct bearing on the final product.

4. As a manufacturer of leather products, you would require different types of metals and alloys to accentuate your products. Sometimes, a camel leather bag might require a classy brass zipper or buckle to achieve the right look. Or if you have a dark brown leather jacket, you might want to use black-coated metal parts made from zinc or other metals.

5. It is important to note that the kind of metal that you choose has a direct bearing on the prices as some metals are costlier than the other.

6. To get a final product that is in keeping with the latest trends, it is important to find a manufacturer who has a finger on the pulse of the fashion world. Handbag supplies designs are forever evolving according to changing fashion trends and your manufacturer should be able to keep up with these changes.

7. These days, customers are very brand conscious. Hence choose a manufacturer who can help you emboss your brand name and logo on the hardware products. This not only gives your product its unique identity, but will also help customers instantly recognize your brand.

Equipped with these tips, you can now add perfection to the last detail in your leather productsbe it shoes, jackets, bags, gloves or other leather accessories else. Leather hardware manufacturers can be located on the internet and you can then contact them to get business quotes.

techno5

Panel PC solutions from Blue Chip Technology

Blue Chip Technology are one of the UK’s leading designers and producers of single board computer platforms and panel PCs. Blue Chip’s single board computer solutions will bring the power of the processor to your business.

Article
Blue Chip Technology is one of the UK’s leading designers and manufacturers of industrial computer platforms and panel PCs. With an outstanding portfolio Blue Chip Technology provide off-the-shelf products including COM boards, single board computers (SBCs), fanless embedded systems, rackmount computers, Panel PCs and digital signage hardware.
Blue Chip Technology have a track record of working with a range of industries including hospitals, assembly lines, rail networks and laboratories both in the UK and across the globe.

Single Board Computers and Panel PCs
Single board computers are entire computers built on a single circuit board. They are most commonly used for industrial purposes, often in situations where smaller, more power-efficient and reliable computers are needed.
A panel PC is a type of industrial computer. A display, usually an LCD (liquid crystal display) is integrated into the motherboard and electronics. Panel PCs range from lower cost types with no environmental sealing to the more expensive, heavy duty models which may be waterproof or even explosion proof. Panel PCs can also be custom designed and built to the requirements and budget of the customer.
The technical experts at Blue Chip Technology have designed and manufactured a wide range of display based solutions to suited to Human Machine Interface (HMI), SCADA, process control, factory automation, building control and home automation applications. The Alpha Panel PC range of 8.4 to 17 inch range of industrial all-in-one units – compact, highly integrated, network-ready devices with full I/O connectivity. The Alpha Panel PC range is IP65/NEMA4 rated and designed to be housed in a panel or enclosure creating a dust and waterproof barrier, an essential requirement for many industrial and commercial applications.

Custom Design
Blue Chip Technology also offer custom design products which are designed and manufactured in-house. As industry leading specialists Blue Chip Technology can either make minor changes to existing products to meet specific needs or can build the products from ground-up development.
Blue Chip excels in custom design because design and manufacture are done in house they are flexible enough to accommodate a small adaptation or bottom up design project. What it doesnt necessarily mean is ramping up extra costs Blue Chip Technology regard many customisation services as integral to the product offering and are happy to provide free of charge.
For more information on the Blue Chip Technology products and services please call today to speak to one of our specialists 01829 772 000.

techno3

ECN FX ROBOT

THE “ECN FX ROBOT” METHOD OF OPERATION EXPLAINED

You want to more information and CLICK HERE TO DOWNLOAD Ecn Fx Robot

If you want to see the Robot’s functions, variables, and other parameters, “click here for details”. You will be surprised how good and precise it is.

Enable me to introduce my latest and finest Foreign exchange software program created that can help you generate profits by means of Forex quicker, completely automated, working 24 hours a day, trading as you loosen up or rest. It’s designed mainly for FX aficionados who’ve at the least primary information about Forex and have been trading already. After all those that by no means traded before can purchase it and with some instructions, use it completely as well.

There are some Forex trading Robots on the market – they normally sell for $a hundred-$200 – and you will note them marketed everywhere in the net nowadays… Nonetheless, most automated Forex techniques nonetheless lose cash since there are loads of unpredictable market situations that the authors of the program didn’t foresee. It’s similar to a programmed computer -chess player- that usually loses when playing knowledgeable human chess player.

However, a Forex trading Robotic has one large advantage. A ROBOT NEVER GETS TIRED. It might “run” 24 hours a day. And, doesn’t “gamble.” And does not get emotional. By no means gets excited when it makes huge trades, or annoyed when it makes small trades or loses! With an excellent system, let the Robot do the “handbook” work.

Methods that always earn cash – regardless the ups and downs of currencies, situations and market fluctuations, are known as “Holy Grails.” Straightforward to fantasize about, hard to get one which in precise fact does this and brings you the pot of gold on the end of the rainbow. So do not be misled by all of the “hype” you hear. Most systems will not be Holy Grails and for even the dealer with great expertise and finesse, there could be at all times lurking the -risk issue!-

My “ECN FX ROBOT” is designed to remove the -danger factor,- the fear of losing and the very fact of losing. Stay relaxed. Use the “ECN FX ROBOT” on your platform and lie on the bed and watch a movie. Or lie on the beach and read a ebook and log in to see how your “ECN FX ROBOT” is accruing you commerce profits.

You want to more information and CLICK HERE TO DOWNLOAD Ecn Fx Robot

If you want to see the Robot’s functions, variables, and other parameters, “click here for details”. You will be surprised how good and precise it is.

techno1

The Importance Of Keeping Accurate Notes In Science

Science is a progressive act. This means that progress in science is a tedious process that requires diligent efforts with respect to record keeping because in the case of every scientist, figuring out everything about a field of study, such as any given sub-niche of chemistry, is impossible, even in a lifetime. Record keeping is of utmost importance and accurate record keeping can and will make the difference between work that is successfully continued by a scientist’s successors and work that is not successfully continued.

In the field of science, all of us stand on the shoulders of giants. In other words, we all learn from our predecessors and build on what they have taught us. However, we are able to learn only from those who have successfully transcribed their knowledge in an accurate and concise fashion so as to facilitate the propagation of the knowledge to those who follow.

Accurate lab notes are a must. Accurate lab notes will have a variety of properties including but not limited to:

An accurate introductory description of the process or processes being studied. For the information following the introduction to be understood in it’s proper context, an accurate introductory description has to be described clearly. Why is this subject of interest? What is the current understanding of the subject and why does it need to be studied further? What questions need to be answered before true progress can be made? All of these question should be covered in the introduction.

Clear and concise methodology. The work that is performed or is to be performed must be clearly spelled out for those reading the notes to understand the important steps to be taken to repeat and confirm the results. Each step must be labeled in detail and must be done so in a way that can be repeated using the notes alone. This is important if results are to be duplicated.

Well documented and understandable results. The results that are discovered by the initial experimenter should also be spelled out in clear detail as they may differ from the results obtained by those following them and trying to repeat their work. If results differ, this should be clearly noted by the scientists attempting to repeat the work and differences in results should also be clearly noted.

Objective conclusions. Conclusions should be recorded and based on evidence and results obtained. If data or results have discrepancies, these should be noted and discussed in the conclusion.

techno2

Error C1041724 Mounting Exchange Server Database

Exchange Server databases’ transactions are temporarily stored in transaction log files. At times, you need to remove these files manually, usually when the disk runs out of space or the circular logging is disabled. If you come to such situations, it is recommended to determine that the logs have been committed to database or otherwise will cause problems. The database usually shows Dirty Shutdown state in such cases. However, the other reason for this is that database is corrupt. If it is, you should look for Exchange Recovery solutions.

You can take the following situation when you try to mount an Exchange Server database. In an attempt of mounting the database, you might receive an error as below:

An internal processing error has occurred. Try restarting the Exchange System Manager or the Microsoft Exchange Information Store service, or both.

ID no: c1041724
Exchange System Manager

The mount operation fails after you receive this error message.

Cause

Error c1041724 can be encountered if you have run eseutil /p repair utility on the affected database. At this point if Eseutil log files remain intact and are not removed, the database can fail to start with the above error.

Solution

To isolate the issue, you need to proceed as follows:

1.You need to first check if eseutil /p command was run. To do so, you should run eseutil /mh command for pub1.edb and priv1.edb and check the repair count value. If it is other than ‘0’, this shows that the command was run.
2.From the previous step, you also need to check for the database consistency. If it exists in Clean Shutdown state, which shows that the log files have been committed, you can safely remove the log files from Exchange Server folder, Mdbdata folder to a backup folder and mount the database.
3.If the database shows ‘Dirty Shutdown’ state, it may be because either all the log files have not been committed yet or the database is corrupt. You can wait for sometime to determine if uncommitted transactions is the case. If not, the database is corrupt that you need to restore from backup or by performing soft recovery.

In cases when database remains corrupted with no access to a suitable backup, you can use third-party Exchange Server Recovery utilities. These special applications allow safe extraction of user mailboxes without any modification to the original content. Exchange Recovery utilities provide you interactive design plus impressive features to experience.

Stellar Phoenix Mailbox Exchange Recovery is a complete tool that repairs Exchange database repair systematically. It is a safe and powerful Exchange Server Recovery tool that supports Exchange Server 5.5, 2000 and 2003. The tool can restore mailboxes in individual .pst files, which can be directly accessed in Outlook. The software is enriched with a realistic approach to repair corrupted EDB file in each instance.

techno20

Create a Free Dynamic Changing Website Without Programming Skills.

Free open source blogging software from WordPress can be used to hold a dynamic, changing website without expert or programming skills. Create a blog in hours.

Free people blogging software can be used to construct and keep a dynamic changing internet site without any programming acquisitions : WordPress is one of the most popular blogging applications programmes freely available.

Two ways to use WordPress : Hosting and WordPress.com. WordPress can be used in two ways.

The easiest, which allows a blog to be created in minutes, is to use WordPress.com which means WordPress will host the web log for free. No software program installation is needed as its already there on the WordPress internet site. Anyone can register and start blogging. The other is to instal the WordPress software system on a waiter hosting a WordPress web log. This commands taking a free download of the WordPress software from WordPress.org and installing it a straightforward physical process for anyone with some expert noesis.

There are WordPress meeting places on the WordPress.org site and elsewhere with circles of help available, both for users of the computer software bloggers and for the technological side (facility, support and upgrades of the software system. Some website hosting companies also offer a free WordPress blog as part of the hosting package.

WordPress is expanding all the time. The number of users is growing as well as the features and functionality because WordPress is a free open-source application that can be entirely customised by anybody with the computer programing skills. Extra, surplus functionality is usually required with open source software program and WordPress is no exception. A number of circuit boards are available offering, for example, searche locomotive optimization, calendars, hunting, different ideas or styles, etc. WordPress Strengths. WordPress is a blogging platform and it works.

One of the major strengths of WordPress is that users can make pages as well as web log positions so that a whole website with stable pages and changing (blogs) message can be constructed and upheld by someone with no programming skills.

WordPress has a focus on web touchstones and serviceability, which are primal elements of dandy WWW software program.

WordPress Disadvantages. Its difficult to find many disadvantages for WordPress.

One disadvantage is that many of the themes do look similar (it is possible to spot a WordPress web log) and whilst a bespoke theme can be developed, this can be dear and the changes will probably need to be reapplied whenever a new version of WordPress is set up.

Some of the boards can be hard to understand, but these are optional and chosen by the blogger.

Picking out free open-source blogging software package from WordPress, allows bloggers to set up a web log with both pages and places on WordPress.com within minutes, without any technical or programing sciences.

a free hosting and free website for anyone